PET release film plays an indispensable role in our daily life and work. After special treatment, it has excellent adsorption and adhesion. It is a commonly used material for heat transfer printing. It is suitable for high temperature resistant paint spraying or masking technology protection on the surface of cars, iron or plastics, devices and furniture, and also for electronics, electrical appliances, Varistor, circuit boards and other fields. We all know that proper protection is essential for any product, including PET release film. This not only optimizes the performance of the product to a certain extent, but also has a significant effect on extending its service life. Next, the editor of the release film manufacturer will give us a specific introduction.

1. PET release film should be stored in the warehouse to prevent exposure to sunlight and rain; Do not touch organic solvents such as acids, alkalis, oils, etc. Keep them clean and monotonous.

2. The diameter of the conveyor roller and the maximum pulley diameter of the conveyor belt should comply with relevant legal regulations.

3. Polyimide tapes of different types, different standard models, different strengths and different layers of cloth shall not be used together.

4. The type and standard of anti-static tape should be reasonably selected based on application needs and specific conditions.

5. It is better to use a crane when loading and unloading the conveyor belt, and use a rigging with a crossbeam to smoothly lift it to prevent damage to the belt edge. Do not force loading and unloading excessively, which may cause loose coils and sleeves.

6. Selecting vulcanized adhesive for conveyor belt joints to improve reliability and increase bonding strength.

7. The gold finger tape should be placed in rolls and not folded. If the storage time is too long, it should be checked once a quarter.

8. Cleanliness is the fundamental living condition for the development and operation of PET release films. Foreign cultural substances can affect belt eccentricity, tension differences, and even fracture.

9. When the conveyor is equipped with baffle and cleaning equipment, the polyimide belt shall be prevented from wearing.

10. Do not allow the polyimide to snake or creep with the tape. Keep the trailing roll and vertical roll flexible and the tension should be moderate.

11. PET release film When early damage to the appearance of polyimide tape is found during application, the cause shall be found and corrected in time to prevent adverse consequences.