Due to the excellent high-temperature resistance,  release silicone film is mainly used for laminating adhesive products. The product uses PET as the substrate and is evenly coated with an extremely thin release agent on one or both sides. The release film surface is flat and smooth, and the coating is uniform, without defects such as wrinkles, particles, bubbles, etc. The product has excellent physical properties, small thickness tolerance, and low heat shrinkage rate; Has high tensile and tear strength, chemical inertness; Release film is generally used to isolate adhesive materials and is widely used in industries such as electronics, spray painting consumables, reflective materials, tape, self-adhesive waterproof rolls, etc.

Product thickness: 0.012mm -0.188mm;
Controllable release force, high glossiness, high cleanliness, residual adhesion of 94%, good surface performance;

Release film characteristics when compounded with adhesive products:
 1) No migration phenomenon. Eliminates the danger of silicone release film transferring to the material it is tightly attached to
 2) The tolerance for the weight per unit area of a single or double sided coating on a release film is very small.
 3) The base film has excellent mechanical strength and chemical properties
 4) High stability under extreme weather conditions.
 5) High temperature resistance can reach 180 ° C over a long period of time and 200 ° C within 10 minutes.
 6) Extremely long shelf life

The adhesive release film can be divided into light release type, medium release type, and heavy release type based on the mobility of silicon and the changes in release force after heating. The release force can be controlled according to requirements. The heat resistance performance is good, and the release film has different thicknesses for customers to choose according to their needs. Generally, the application thickness is 12um/19um/25um/36um/50um/75um/100um/125um/188um, and other products can be divided into light, medium, and heavy release types, Different release forces are suitable for bonding adhesive tapes or films with different viscosities& Nbsp;

What is PET silicone oil film:
 PET silicone oil film is based on PET film and evenly coated with a silicon oil layer with a thickness of approximately 0.0001MM on its surface to reduce the original adhesion on the surface of the PET film and achieve the effect of release.
Surface treatment: Apply silicone oil, which can be single-sided (single sided PET silicone oil film) or double-sided (double sided PET silicone oil film)
Substrate: PET film (usually using transparent PET film as the substrate, or black or white PET film as the substrate)
Usage: die-cutting, heat transfer printing, hot stamping, gluing, waterproof materials, silicone products,
Thickness: 0.025mm-0.188MM
Width: 50-1800 (mm)
Tensile performance: Excellent tensile performance
Manufacturer/Place of Origin: Bao'an, Shenzhen
Impact resistance: Excellent impact resistance and wear resistance
Production process: It is to evenly apply a layer of silicone oil on the surface of PET film.
Tearing performance: No white edge, irregular tearing edges, layered and not sharp, tearing sound is explosive sound
Applicable temperature: -70 ° C to 150 ° C

Barrier performance: General: 94VTM-2; High: 94VTM-0
Product features: Easy to process, good surface swelling force, good tensile resistance, high temperature resistance, transparent heat shrink, uniform peeling force, and stability.
Product classification: It can be divided into single-sided PET silicone oil film and double-sided PET silicone oil film. According to the magnitude of release force, it can be divided into light release, medium release, and heavy release.